
Friday, 31 May 2013
Body Protectors, An Essential Piece of Kit!

Friday, 10 May 2013
How to Choose a Bit
To conclude our Bitting Blog Feature which saw us feature a three part series of Questions and Answers regarding bitting we present our latest blog explaining how to measure your horse for a bit.
Use a piece of smooth round wood, e.g. a wooden spoon handle or piece of doweling, and two rein stops (rubber bands can be used but are slightly less accurate.) Put the wooden rod into your horses mouth, so that it just lifts the corners of his lips into no more than 2 wrinkles, and push the rein stops up to touch his lips on either side. Remove the wood, and measure the gap from the outside of the rein stops to give the correct bit size including the right amount of clearance for the bit. If you are between sizes (e.g. 5 1/4"), it is normally better to choose the smaller of the two sizes (e.g. 5") unless opting for a loose ring bit when it can be advantageous to go slightly large to prevent pinching.
So which bit should you buy for you horse?
It can be a challenge to find the right bit for your horse however there are some conformational pointers you can look for that help to suggest what type of bit may suit your horse and narrow the search. Certain breeds of horse can be prone to certain mouth shapes for example cob types often have large tongues which leave little room for a thick bit to sit comfortably in. Thin bits are often considered to be severe, but if a horse has a thick tongue a thinner bit will allow the horse to relax and swallow where a thicker ‘kind’ bit would not, presuming the rider is competent enough not to need the reins for support the thin bit is actually far kinder to the horse!
When examining your horses mouth, have a look carefully at the shape and anything that is different or unusual as even little things can potentially make a big difference to the way a horse will react in a bit. These can be such as; parrot mouth, a low palette, the presence of wolf teeth to name but a few! To receive one-to-one bitting advice for your horse contact The Saddlery Shop online and with our huge range of bits available there is sure to be something to suit every horse and rider combination.
Friday, 3 May 2013
Bitting Edition Part 3
As the final part of the three part series The Saddlery Shop takes a look at bitting and presents a Q & A featuring bitting enquiries and bespoke answers from bitting expert and owner of The Saddlery Shop, Lucy Nicholas. Question
"I have a new 15hh cob Teddy, who is 7 years old, green, and very forward going. At the moment he is in a pelham (5.5 inch although I think he would benefit from a quarter inch wider bit) because he has poor brakes. I'd like to do dressage and showing with him in the long run. Ideally I would have a dressage legal bit for schooling him, but I do need brakes. I would like to use one bit all the time.What would you suggest?"
Answer
Lucy says "I always advise to have your horses teeth, back and saddle checked and recommend that you have a good progressive schooling plan in place with an instructor. The emphasis needs to be on lightening your horses' forehand using lots of circles and transitions during the session ensuring he responds immediately to the aids. This will get him between hand and leg, giving you far more control in a snaffle. Very few horses only need one bit, working in an arena or doing a dressage test is not as exciting as cantering accross open coutryside in company and even the best schooled horse will usually need something different for the extra control needed. Pelhams can make a horse feel very 'dead' in the hand and do sometimes encouraging leaning on the bit unless you ride with double reins to enable you to push the horse up into the bit without the use of the curb. I would really recommend a bit that will help with schooling like this Myler Low Port Eggbut Snaffle.
This bit will enable you to give very clear instructions to your horse, and will be comfortable in his mouth as it is not too thick and has space for the tongue. You also have the option of adding a curb if you needed extra brakes out hacking in the immediate future.
Kind Regards, Lucy

Friday, 26 April 2013
Bitting Advice Edition Part 2
As part two of a three part series The Saddlery Shop takes a look at bitting and presents a Q & A featuring bitting enquiries and bespoke answers from bitting expert and owner of The Saddlery Shop, Lucy Nicholas.
Question "I have a 4yo welsh cob mare who will be 5 in May. I have owned her for 18 months since she was backed. At first she had a rubber eggbutt snaffle but was inclined to chew off the rubber which I thought was going to make it uncomfortable for her. I started looking into sweet iron bits and have been trying a sweet iron copper roller D-ring snaffle. She doesn't seem any different in either bit. We have been lightly schooling and had a few hacks over the winter and we are hoping to build up in the summer to doing a couple of pleasure rides and maybe some fun dressage classes and jumping at home.
I'd like to keep her in a fairly mild bit as for the moment she doesn't need anything stronger (touch wood!). I'd like some advice on what might be best for my pony rather than buying something standard for the sake of it. I was thinking she might be best off in a sweet iron snaffle with a lozenge? I'd like her to stay in a D-ring or eggbutt.
Would be grateful for help, Thanks
Aimee Marsh"
Answer
"It is important to have a good progressive schooling plan in place, ideally with the help of a good instructor, and keep taking it slowly as you are doing. Young horses will tend to get tired easily and thats when problems become apparent, so you sound like you are taking it nice and slowly as your horse is not objecting at the moment! The copper roller is actually a fairly harsh bit, so I wouldn't suggest that it is an ideal bit to use. A double jointed bit, with a lozenge and a sweet metal would be ideal. The sweet iron copper lozenge snaffle would be a good bit to try, the ideal being a Sprenger Dynamic as they are anatomically designed and are one of the nicest bits you can bit a youngster in. Steer away from anything too thick, and do consider a loose ring if you have steady hands- they are very nice for communication, but an eggbutt is better if you are worried you may send too many comflicting signals as they deaden the feeling to the horse. A D cheek bit is actually quite a strong cheek and if you don't need help with steering consider an eggbutt bit or a loose ring.
Kind Regards,
Lucy
www.thesaddleryshop.co.uk"

Friday, 19 April 2013
Bitting Advice Edition Part 1
As part of a three part series The Saddlery Shop takes a look at bitting and presents a Q & A featuring bitting enquiries and bespoke answers from bitting expert and owner of The Saddlery Shop, Lucy Nicholas.
Question
Dear The Saddlery Shop,
I am desperate to find an answer to my young horses bitting problems! He is a 15.2hh Warmblood gelding who is rising 5 years old.I have owned him since he was a foal and he is a big confident character who does like to be in charge of situations and be the boss!
I don't have any huge ambitions for him but he is very correct with a huge jump and fantastic movement and I have a background in Eventing so I probably ought to!
His main problem is taking any sort of pressure from the rider, and though he is happy to hack out when schooling after warming up as soon as you ask for more flexion, bend or self carriage he gets his tongue over the bit, pokes his tongue out and evades the contact. He can become quite nappy and I feel like I have hit a brick wall having tried half moon bits; both happy mouth and snaffle, a french link, a shaped snaffle and a hanging cheek.
His teeth are checked regularly and he has had his wolf teeth removed and has no trouble eating.
Answer
Lucy says "This is a difficult problem, and horses that put their tongue out can not always be cured- even in a bitless bridle the tension caused by just being ridden can be enough for it to manifest itself! There are two main ways to approach the sitaution. Firstly using a high ported bit to help prevent him doing it or hopefully finding a bit (or lack of bit) that he feels happy and confident in. The problem is, he may not feel happy in anything, and if you try to prevent him doing it, it could cause more problems as you have found. My suggestion would be the Short Shank Combination. The theory behind it being it will take the pressure away from his mouth, but still give you good control. It has a small port to allow tongue room, but will not make him feel uncomfortable as the bit is anatomically designed to follow the contours of the horses mouth."

Friday, 12 April 2013
Cool Therapy for Equines!

Friday, 29 March 2013
Give Your Horse Some Relief!

Subscribe to:
Posts (Atom)